Seacliff (Z) Edge
The edge is beveled, not rounded, at the top, often referred to as an Eased profile. Shown in WINDERMERE™.Available Depths: 2cm, 3cm, 4cm
Bryn (VF) Edge
This profile, often called a reverse Waterfall, is a traditional design with a twist. Shown in ELLA™.Available Depths: 4cm
Idris (IM) Edge
A reversed and sharply slanted mitered edge gives this profile a dramatic appearance. Shown in SWANBRIDGE™.Available Depths: 2cm, 3cm
Shale (1Z) Edge
This edge seamlessly integrates flush with a cabinet door creating a modern, sleek look. Shown in DUNMORE™.Available Depths: 2cm
Mesa (QM) Edge
This edge is a traditional ornate ogee edge reversed down, giving it a modern spin. Shown in HELMSLEY™.Available Depths: 6cm
Cascade (VFZ) Edge
Combines a reverse Ogee edge stacked on top of a straight drop modernizing the traditional edge. Shown in SUMMERHILL™.Available Depths: 6cm
Cornice (MQ) Edge
Our fullest Ogee profile design, also called a Cove Ogee over Ogee. Shown in BELLINGHAM™.Available Depths: 6cm
Moraine (CHISELED) Edge
For a natural, rustic appearance, choose this hand-finished profile often named Chiseled, Broken Edge or Rock Face. Shown in OAKMOOR™.Available Depths: 2cm, 3cm, 4cm, 6cm
Ledge (MD) Edge
Fading back at the bottom edge, this profile is sometimes named a Reverse Bevel or Plater. Shown in WELLINGTON™.Available Depths: 3cm
Boulder (FV) Edge
This profile, often called Waterfall, is one of our most ornate. Shown in GALLOWAY™.Available Depths: 4cm
Rimrock (Mitered) Edge
The Mitered edge is an edge assembled from two pieces, to give a countertop with less weight the appearance of a much heavier one. Shown in BRIGHSTONE™.Available Depths: 2cm, 3cm
Volcanic (V) Edge
Deeply rounded at the top and bottom of the edge, this profile is sometimes also called a Bullnose or Full Bullnose. Shown in BERWYN™.Available Depths: 2cm, 3cm, 4cm, 6cm
Glacial (FZ) Edge
A classic Ogee profile. Shown in HARLECH™.Available Depths: 4cm
Basin (FS) Edge
Our thinnest Ogee profile. Also called a Saskatoon Ogee or Short Ogee. Shown in PRINCETOWN™.Available Depths: 3cm
Treeline (ZS) Edge
This angled edge is often called a Bevel. Shown in BERKELEY™.Available Depths: 3cm, 4cm
Double Treeline (AR) Edge
An angled cut to both the top and bottom edges, sometimes called a Double Bevel. Shown in FAIRBOURNE™.Available Depths: 2cm, 3cm, 4cm
Ridgeline (TR3) Edge
This simple, yet bold profile has a 1/8″ radius and is sometimes referred to as a double pencil edge. Shown in ROXWELL™.Available Depths: 2cm, 3cm, 4cm, 6cm
Piedmont (A) Edge
Softly rounded on the top edge. Additionally referred to as ½ Bullnose, Demi Bullnose or a ¼ Round. Shown in WHITNEY™.Available Depths: 2cm, 3cm, 4cm
Summit (T) Edge
Both the top and bottom edged of this edge profile are rounded. It’s sometimes called a ¼ Round Double. Shown in DARON™.Available Depths: 2cm, 3cm, 4cm